Appion HVAC/R Tools
3/8 in. Speed-Y
High-speed Y-fitting for fast refrigerant recovery or evacuation, with two 3/8 in. male flare ports and one 3/8 in. female flare port for connecting multiple hoses to a single point.
High-speed Y-fitting
Split one access point into a faster full-flow setup.
The MegaFlow 3/8 in. Speed-Y makes it easy to connect multiple hoses to a single point, helping technicians improve flow during recovery or evacuation without the drawbacks of a traditional manifold.
- Large inner diameter for unrestricted Full Flow.
- Two 3/8 in. male flare ports and one 3/8 in. female flare port.
- Vacuum-rated to 20 microns for deep evacuation work.
- Designed for high-pressure refrigerants such as R410A.
- Useful with any vacuum pump or recovery machine where multiple hoses improve flow.
Key performance specs
*Specifications based on the Appion SPDY38 product information.
Large multi-port systems
Make limited pump ports less limiting.
On larger systems, the Speed-Y can help make a vacuum pump or recovery setup more efficient by allowing multiple hoses to feed a single port. The greater the flow, the faster it can go.
Vacuum and pressure use
Built for deep vacuum and high-pressure refrigerants.
The SPDY38 is vacuum-rated to 20 microns and designed for high-pressure refrigerants such as R410A, making it suitable for critical recovery and evacuation stages when leaks or restrictions cost time.
Compatible parts & related products
Linked SPDY38 parts from Omni Tools.
Click any compatible repair kit, replacement part or closely related product below to open its product page.Useful information & technical bulletins
Official Appion resources for the SPDY38.
SPDY38 product information and relevant Appion technical/safety resources. PDF cards show only the document title and Open PDF.Useful information
Ready to source the SPDY38?
Find your nearest authorised distributor.
Omni Tools supports Appion products across Australia through local distributors, service information and warranty pathways.