Calorflex CEFx etched foil self-adhesive heater range Calorflex etched foil heater installed on a stainless steel vessel Calorflex etched foil heater product image on white background
CEFB0363 — CEFB0366 650W to 1500W flexible flat heaters for bain-marie, hot plate and heated-surface applications
Calorflex CEFB0363 to CEFB0366 etched foil heater range banner

Calorflex

Etched Foil Heater Self-Adhesive Range

Flexible flat etched foil heaters for fast, even surface heating across bain-marie units, hot plates, food warmers and equipment surfaces that need controlled heat transfer.

Available exclusively through your local distributor
BrandCalorflex
SKU RangeCEFx
Product TypeSelf-adhesive etched foil heater range
Model OptionsCEFB0363, CEFB0364, CEFB0365 and CEFB0366
Power Options650W, 700W, 1200W and 1500W
Listed Sizes275 × 375 mm to 450 × 575 mm
ConstructionNickel/chrome resistive circuit between insulating layers
Supply Voltage Platform1.5V to 400V
Maximum External SizeUp to 3000 × 600 mm platform maximum
StandardsEC certification available; produced and tested to EN60335
Buy From Your Local Distributor Service & Warranty Product Resources

Ask for Range #

CEFx

Flexible flat heaters for controlled surface and fluid-heating applications, including bain-marie equipment, hot plates, food warmers and heated surfaces.

Find a Distributor

Technical snapshot

Four listed flat-heater options from 650W to 1500W.

Core CEFx range details for comparing wattage, heater footprint, construction and platform limits before selecting a replacement or project heater.
RangeCEFB0363 — CEFB0366Four listed Omni models
Power650W to 1500WListed model range
Size Range275 × 375 to 450 × 575 mmListed heater footprints
Voltage Platform1.5V to 400VCalorflex CEFx platform
ConstructionPrinted-circuit styleNickel/chrome resistive circuit
ControlsOptions on requestThermostats, probes and fuses

Fast surface heating

Flat, flexible heat for equipment panels, trays and warm surfaces.

The CEFx etched foil heater range uses a nickel/chrome resistive circuit enclosed between insulating layers. The flat construction helps transfer heat evenly across the mounting surface while keeping the heater compact enough for equipment builds and replacement work.

  • Designed for surface and fluid-heating applications.
  • Suited to bain-marie units, hot plates, food warmers and heated surfaces.
  • Flexible flat heater construction supports close contact with the heated surface.
  • Available through Omni as 650W, 700W, 1200W and 1500W listed options.
  • Custom dimensions and powers may be produced on request after feasibility checks.

Where it makes sense

Use an etched foil heater where the job calls for a thin heating element with broad surface contact rather than a cable, band or tubular heater.

  • Bain-marie and catering equipment heating.
  • Hot plates, food warmers and heated display surfaces.
  • Flat equipment surfaces that need controlled heat transfer.

Range selector

Pick by wattage, footprint and heated surface area.

Compare the listed CEFx models by output and heater size so the selected foil heater suits the equipment surface, heat load and available mounting area.

650W option

CEFB0363

650W275 × 375 mm

Compact listed heater footprint for smaller heated panels, trays or surfaces requiring controlled flat heating.

700W option

CEFB0364

700W270 × 460 mm

Longer narrow footprint for surfaces where width is limited but additional heated length is useful.

1200W option

CEFB0365

1200W290 × 470 mm

Higher-output mid-size option for equipment that needs stronger heat input across a moderate footprint.

1500W option

CEFB0366

1500W450 × 575 mm

Largest listed heater in the range, suited to wider surfaces and higher heat-load applications.

1Match the footprintCheck the available mounting area and keep the heater fully supported by the surface.
2Check the heat loadChoose the wattage that suits the application, material and required temperature response.
3Plan the controlsCalorflex notes thermostats, thermocouples, probe pockets, thermal fuses, NTC and PT100 options are available on request.

Use notes

Before fitting a foil heater.

Surface condition, heater contact, electrical protection and temperature control all matter. Confirm the equipment surface and heating target before energising the heater.

Fit to a clean surfaceRemove dirt, oil and loose material so the heater can sit flat against the mounting surface.
Avoid folds and air gapsKeep the foil heater flat and evenly supported to reduce hot spots and poor heat transfer.
Control the temperatureUse suitable sensing, switching or limiting hardware for the equipment and heated material.
Follow electrical proceduresConfirm voltage, load, earthing, protection and site safety requirements before installation.

Related Calorflex products

More heating products from Omni Tools.

Internal Omni Tools links for nearby Calorflex heating cable, foil, drum, sump and drain heater products.
Calorflex RangeView Products Constant Power Silicone Heater CableView Product Cylinder Drum Heater RangeView Product Sump Heater / Crankcase CompressorsView Product Evaporator Pan Heater RangeView Product Constant Power Drain Heater CableView Product Drain Heater KitsView Product

Useful information & documents

CEFx resources.

Omni Tools product and range links, plus the official Calorflex CEFx product information page.

Omni Tools links

Calorflex RangeOpen Resource CEFx Product PageOpen Resource

Manufacturer information

Calorflex CEFx Product PageOpen Resource Calorflex Download AreaOpen Resource

Ready to source the CEFx range?

Find your nearest authorised distributor.

Omni Tools supports Calorflex heating solutions across Australia through local distributors, product information and support pathways.

Find a Distributor Contact Omni Tools